Managing the Technological Potential of Eschweilera truncata A. C. Sm in the Amazon
Main Article Content
Abstract
Eschweilera truncata trees, known commercially by the name of Matamatá, are abundant, widely distributed throughout the forest, and characterized by important features for forest management, but are not harvested due to the scarcity of studies of the technological attributes that would reveal their potential, such as their machining and physical properties. Otherwise such studies might contribute to the inclusion of new species in the market, strengthening the sustainability of the forest ecosystems. Given this gap, the present research aimed to evaluate the performance of Matamatá wood in terms of its physical properties and behaviour under the machining process that would be used in this sector of the timber industry. The research involved a study of the tree, from which a base disk was removed in order to analyse its apparent density, density, shrinkage and anisotropy coefficient. The tradable shaft was split into logs and planks to assess the effects of machining processes. In the data analysis, we used descriptive statistics and the Tukey test. The results obtained classify Matamatá wood as high density and identify its anisotropy coefficient of 1.90, suggesting a medium to low stability. E. truncata wood performed excellently in the machining evaluation, and its results in the planer, sandpaper, drill perforation, frame in the top and lathe tests were also outstanding; in addition it presented wood material of the same quality throughout, whether heartwood or sapwood. This is an important indicator of wood yield, signifying that greater use can be made of the wood. The performance of the wood was validated via the manufacture of products such as furniture, decoration and finger-boards for musical instruments. In general, it can be concluded that the wood studied may be used in the lumber industry, because it presents similar features to those in the species already marketed and because it is plentiful all over the Amazon region.
Downloads
Article Details

This work is licensed under a Creative Commons Attribution 4.0 International License.
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher. The Editors reserve the right to edit or otherwise alter all contributions, but authors will receive proofs for approval before publication.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.
References
ABNT. (Associação Brasileira de Normas Técnicas). NBR 11941: Madeira – Determinação da densidade básica. Rio de Janeiro, 6 pp. 2003
ASTM. (AMERICAN SOCIETY FOR TESTING AND MATERIALS). ASTM D1666 - 11: Métodos de teste padrão para realização de testes de usinagem de madeira e de madeira de Materiais Painel, 2011.
BARROS, S. V. S. Avaliação da qualidade da madeira de árvores da Amazônia por método não destrutivo de propagação de onda: tomógrafo de impulso e stress weve timer. Manaus – AM, 2016. Originalmente apresentada como tese de doutorado, Instituto Nacional de Pesquisas da Amazônia, 134 pp., 2016
GALVÃO, A. P. M.; JANKOSKY, I. P. Secagem Racional da Madeira. São Paulo, SP: Nobel, 1984.
INSTITUTO BRASILEIRO DE GEOGRAFIA E ESTATÍSTICA - IBGE. Produção da Extração Vegetal e da Silvicultura 2016. Rio de Janeiro, v. 31, p.54, ISSN 0103-8435, 2016.
INTERNATIONAL TROPICAL TIMBER ORGANIZATION. (ITTO). Reseña bienal y evaluación de lasituación mundial de lasmaderas 2015-2016. p. 230. 2017.
IPT (INSTITUTO DE PESQUISAS TECNOLÓGICAS). Madeira: uso sustentável na construção civil. São Paulo, 2ed, 99pp. 2009.
LUCAS FILHO, F. C.; BOEHS, L. Usinagem da madeira na indústria de móveis. Revista da Madeira, v. 108, pp. 56-59, 2007.
MELO, J. E.; CORADIM, V.T.R.; MENDES, J.C. Classes de densidade para madeiras da Amazônia.In: 6 Congresso Florestal Brasileiro, Campos do Jordao, pp. 695-699,1990
MOUTINHO, V. H. P.; COUTO, A. M.; LIMA, J. T.; AGUIAR, O. J. R.; NOGUEIRA, M. O. G. Caracterização energética de madeiras de espécies conhecidas no Amazônia como Matá-Matá (Eschweilera Mart ExDc).Scientia Forestalis. v. 39, n. 92, pp. 457-461, Piracicaba, 2011
NASCIMENTO, C.S.; NASCIMENTO, C.C.; HIGUCHI, N.; CRUZ, I.A. Caracterização tecnológica da madeira de matá-matá (Eschweilera odora Poepp. Miers). Anais do Seminário Internacional em Ciências do Ambiente e Sustentabilidade na Amazônia, v. 5. Manaus EDUA 2018. ISSN 2176-3500
NASCIMENTO, C.C; BRASIL,M. M.; NASCIMENTO, C. S. BARROS, S.V.S. Estimativa da densidade básica da madeira de Eschweilera odora (Poepp).) Miers por espectroscopia no infravermelho próximo. Ciência da Madeira (Brazilian Journal of Wood Science), 8(1): 42-53, 2017.
NASSUR, O. A. C.; ROSADO, L. R.; ROSADO, S. C. da S.; CARVALHO, P. M. de. Variações na qualidade de toras de Tonnaciliata M. Roem. com dezoito anos de idade. Revista Cerne, Lavras, v. 19, n. 1, pp. 43-49, jan./mar. 2013.
OLIVEIRA, J. T. S.; TOMAZELLO FILHO, M.; FIEDLER, N. C. Avaliação da retratibilidade da madeira de sete espécies de Eucalyptus. Revista Árvore, Viçosa, v. 34, n. 5, pp. 929-936, 2010.
PINHEIRO, C.; ALVES, M.; RIBEIRO, M.; AMARAL, S.; KONDO, M. Monitoramento instantâneo da qualidade superficial de peças de madeira em processo de fresamento. In: Congresso Brasileiro de Engenharia de Fabricação, 2017, Joinville. Anais do IX Congresso Brasileiro de Engenharia de Fabricação, 2017.
REIS, L. P.; RUSCHEL, A. R.; SILVA, J. N. M.; REIS, P. C. M.; CARVALHO, J. O. P.; SOARES, M. H. M. Dinâmica da distribuição diamétrica de algumas espécies de Sapotaceae após exploração florestal na Amazônia Oriental. Revista de Ciências Agrárias, v. 57, n. 3, pp.234 - 243, 2014. doi: 10.4322/rca.ao1401
REIS, P. C. M; REIS, L. P.; SOUZA, A. P.; REGO, L. J. S.; SILVA, L. F. Distribuição diamétrica após colheita de madeiras com ênfase às espécies de Lecythidaceae. EnciclopédiaBiosfera, v. 13, n. 24, p. 423, 2016.doi: 10.18677/EnciBio_2016B_038.
RICHARDSON V. A;PERESC.A.Temporal Decay in Timber Species Composition and Value in Amazonian Logging Concessions.PLoS ONE 11(7):e0159035. doi:10.1371/journal.pone.0159035, 2016
TAQUES, A. C.; ARRUDA, T. P. M. Usinagem da madeira de angelim pedra (Hymenolobiumpetraeum). Revista de Ciências Agroambientais, v.14, n.1, pp.97-103. Alta Floresta, MT, 2016.