Design and calculation of heat transfer of the passive cooling modules for low-pressure hydrogen vessels

Authors

DOI:

https://doi.org/10.31686/ijier.vol9.iss11.3492

Keywords:

Metalhydride, pressure vessel, stress analysis, hydrogen

Abstract

This paper deals with the issue of improving the temperature management of a metal hydride tank to reduce the energy intensity of cooling. The problem of absorption and adsorption of hydrogen gas in metals, cooling of metal hydride tanks in the process of hydrogen absorption while protecting the current level of development of science and research for this area is analysed. The work also deals with numerical and experimental verification of a prototype metal hydride tank with passive cooling.

Downloads

Download data is not yet available.

Author Biographies

Marián Lázár, Technical University of Košice

Department of Power Engineering, Faculty of Mechanical Engineering

Filip Duda, Technical University of Košice

Department of Power Engineering, Faculty of Mechanical Engineering

Ľubomíra Kmeťová, Technical University of Košice

Department of Power Engineering, Faculty of Mechanical Engineering

Natália Jasminská, Technical University of Košice

Department of Power Engineering, Faculty of Mechanical Engineering

Šimon Hudák, Technical University of Košice

Department of Power Engineering, Faculty of Mechanical Engineering

References

HAHNE, E., KALLWEIT, J.: Thermal conductivity of metal hydride materials for storage of hydrogen: experimental investigation. Int. J. Hyd. Ener. 1998, p. 23,107-114. DOI: https://doi.org/10.1016/S0360-3199(97)00020-7

ROUGUEROL, F., ROUGUEROL, J., SING, K. S. W., MAURIN, G., LLEWELLYN, P.: Adsorption by Powders and porous Solids. 2014.

JASMINSKÁ, N., BRESTOVIČ, T., LÁZÁR, M.: Výroba a uskladnenie vodíka. Košice: SjF TU 2015, 136 s. ISBN 978-80-553-2378-7.

DION, J.: Adsorption of molecules onto metallic surfaces: theory and applications. Available on internet: http://www.uvm.edu/~jdion/personal/adsorption.html

SOMO, T. R., MAPONYA, T. C., DAVIDS, M. W., HATO, M. J., LOTOTSKYY, M. V., MODIBANE, K. D.: Hydrogen absorption behaviour of metal alloys prepared through mechanical alloying. 2020. DOI: https://doi.org/10.3390/met10050562

CRIVELLO, J. C., DENYS, R. V., DORNHEIM, M., FELDERHOFF, M., GRANT, D. M., HUOT, J., JENSEN, T. R., DE JONGH, P., LATROCHE, M., WALKER, G. S., WEBB, C. J., YARTYS, V. A.: Mg-based compounds for hydrogen and energy storage. 2016. DOI: https://doi.org/10.1007/s00339-016-9601-1

Downloads

Published

01-11-2021

How to Cite

Lázár, M., Duda, F., Kmeťová, Ľubomíra, Jasminská, N., & Hudák, Šimon. (2021). Design and calculation of heat transfer of the passive cooling modules for low-pressure hydrogen vessels. International Journal for Innovation Education and Research, 9(11), 212–217. https://doi.org/10.31686/ijier.vol9.iss11.3492

Most read articles by the same author(s)