Bayesian Regularizers of Artificial Neural Networks applied to the reliability forecast of internal combustion machines in the short-term
Keywords:Reliability, RNA, Bayesian Regularizers, UTE
Predictive as well as preventive maintenance are tools of maintenance programs that aim to increase or maintain the life expectancy of an equipment through computational techniques and tools. Bearing in mind that the power generation industry has a high maintenance rate with machines and / or electric generators stopped, this research aims to develop a computational model for predicting the Reliability Key Performance Indicator (KPI) to identify how available the equipment will be in a time span of 22 days, for this the methodology to be used will be based on analyzes and tests of artificial neural network (ANN) architectures using the Bayesian Regularizers training algorithm, alternating the transfer functions in the layers hidden to find the best state of convergence and the minimum Root Mean Square Error (RMSE) value calculated between the real and simulated outputs. According to the results obtained by the training, validation and test steps, the algorithm presented a RMSE rate of 0.0000104202 and a 99.9% correlation between the real and simulated values, thus the model is able to identify which machine will have the greatest efficiency and less efficiency within the defined time span.
ABDULRAHMAN, Shaymaa Adnan et al. Comparative study for 8 computational intelligence algorithms for human identification. Computer Science Review, v. 36, p. 100237, 2020.
AGNESE, Marco Antônio Dall. Análise da confiabilidade da manutenção em tratores de uma empresa de produção agrícola. 2020.
ARABI BULAGHI, Zohre et al. World competitive contest-based artificial neural network: A new class-specific method for classification of clinical and biological datasets. 2020.
ARUNTHAVANATHAN, Rajeevan et al. Fault detection and diagnosis in process system using artificial intelligence-based cognitive technique. Computers & Chemical Engineering, v. 134, p. 106697, 2020.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS (ABNT). NBR 5462: confiabilidade e mantenabilidade - terminologia. Rio de Janeiro, 1994.
AYVAZ, Serkan; ALPAY, Koray. Predictive maintenance system for production lines in manufacturing: A machine learning approach using IoT data in real-time. Expert Systems with Applications, v. 173, p. 114598, 2021.
BAI, Bin et al. Fault data screening and failure rate prediction framework-based bathtub curve on industrial robots. Industrial Robot: the international journal of robotics research and application, 2020.
BARBOSA, Douglas AM; FERREIRA, Vitor H. Inferência Bayesiana Aplicada a MLPs para Previsão Probabilística de Carga Semanal. Simpósio Brasileiro de Sistemas Elétricos-SBSE, v. 1, n. 1, 2020.
BAROROH, Dawi Karomati; CHU, Chih-Hsing; WANG, Lihui. Systematic literature review on augmented reality in smart manufacturing: Collaboration between human and computational intelligence. Journal of Manufacturing Systems, 2020.
CABEZA, R. Torres et al. Faults Diagnostic using Hopfield Artificial Neural Network in front of Incomplete Data. Journal of Engineering and Technology for Industrial Applications-JETIA, v. 4, n. 13, p. 6, 2018.
CARDOSO, Diogo Emanuel Da Rocha. Aplicação de conceitos de manutenção preditiva com aplicação de ferramentas de Inteligência Artificial. 2020.
CHEN, Xiang et al. On the role of crack tip creep deformation in hot compressive dwell fatigue crack growth acceleration in aluminum and nickel engine alloys. International Journal of Fatigue, v. 145, p. 106082, 2021.
CHINI, Christopher M.; LOGAN, Lauren H.; STILLWELL, Ashlynn S. Grey water footprints of US thermoelectric power plants from 2010–2016. Advances in Water Resources, v. 145, p. 103733, 2020.
CORRÊA, Rafaela Gomide. Estudo numérico do escoamento de ar em um motor de combustão interna. 2020.
EL-ADAWY, Mohammed et al. Stereoscopic particle image velocimetry for engine flow measurements: Principles and applications. Alexandria Engineering Journal, v. 60, n. 3, p. 3327-3344, 2021.
FERREIRA, Vitor Hugo; DE SOUZA, Julio Cesar Stacchini; DO COUTTO FILHO, Milton Brown. Inferência Bayesiana Aplicada ao Desenvolvimento de Modelos Neurais para Tratamento de Alarmes em Subestações, 2020.
FONSECA-JUNIOR, M. et al. Programa de gestión de mantenimiento a través de la implementación de herramientas predictivas y de TPM como contribución a la mejora de la eficiencia energética en plantas termoeléctricas. Dyna, v. 82, n. 194, p. 139-149, 2015.
HAN, Xiao et al. Remaining useful life prediction and predictive maintenance strategies for multi-state manufacturing systems considering functional dependence. Reliability Engineering & System Safety, v. 210, p. 107560, 2021.
Koçak, Y., & Üstündağ Şiray, G. New activation functions for single layer feedforward neural network. Expert Systems with Applications, 164, 113977. doi:10.1016/j.eswa.2020.113977. 2021.
LEOCÁDIO, Caio Monteiro; FERREIRA, Vitor Hugo. Inferência Bayesiana no desenvolvimento de previsores neurais de vazão diária utilizando informações de precipitação. Journal of the Brazilian Neural Network Society, v. 10, n. 3, p. 157-165, 2012.
LU, Xue-Qin et al. Metaheuristics for homogeneous and heterogeneous machine utilization planning under reliability-centered maintenance. Computers & Industrial Engineering, v. 151, p. 106934, 2021.
LUGHOFER, Edwin; SAYED-MOUCHAWEH, Moamar. Predictive maintenance in dynamic systems: advanced methods, decision support tools and real-world applications. Springer, 2019.
MANHERTZ, Gabor; BERECZKY, Akos. STFT spectrogram based hybrid evaluation method for rotating machine transient vibration analysis. Mechanical Systems and Signal Processing, v. 154, p. 107583, 2021.
MEIßNER, Christian et al. Investigation on wall and gas temperatures inside a swirled oxy-fuel combustion chamber using thermographic phosphors, O2 rotational and vibrational CARS. Fuel, v. 289, p. 119787, 2021.
MORO, Giancarlo Dal. Efficient Joint Analysis of Surface Waves and Introduction to Vibration Analysis: Beyond the Clichés. Springer Nature, 2020.
RIGHETTO, Sophia Boing et al. Manutenção Preditiva 4.0: Conceito, Arquitetura e Estratégias de Implementação. 2020.
ROCHA, Márcio Andrade et al. Aplicação da análise de vibração na determinação do atraso de ignição em um motor de combustão interna por compressão. Brazilian Journal of Development, v. 6, n. 12, p. 99947-99952, 2020.
RUIZ-HERNÁNDEZ, Diego; PINAR-PÉREZ, Jesús M.; DELGADO-GÓMEZ, David. Multi-machine preventive maintenance scheduling with imperfect interventions: A restless bandit approach. Computers & Operations Research, v. 119, p. 104927, 2020.
SALLES, Gisele Maria de Oliveira et al. Estimação de intervalos de tempo ótimos para a inspeção e manutenção de escovas em unidades geradoras da copel. 2020. Dissertação de Mestrado. Universidade Tecnológica Federal do Paraná.
SÁNCHEZ, D. et al. Experimental enhancement of a CO2 transcritical refrigerating plant including thermoelectric subcooling. International Journal of Refrigeration, v. 120, p. 178-187, 2020.
SCHWENDEMANN, Sebastian; AMJAD, Zubair; SIKORA, Axel. A survey of machine-learning techniques for condition monitoring and predictive maintenance of bearings in grinding machines. Computers in Industry, v. 125, p. 103380, 2021.
SILVA, Jean da Silva de Abreu et al. PROPOSTA DE IMPLANTAÇÃO DE SISTEMA DE PROTEÇÃO CONTRA POTENCIAL DE FALHA DO MOTOR À DIESEL (DISPARO DO MOTOR). ITEGAM-JETIA, v. 5, n. 19, p. 06-11, 2019.
SOLTANALI, Hamzeh et al. A comparative study of statistical and soft computing techniques for reliability prediction of automotive manufacturing. Applied Soft Computing, v. 98, p. 106738, 2021.
SOUZA, Arthur Gabriel. REDESIGN DE MÁQUINA EMBALADORA TERMOENCOLHIVEL COM BASE NA METODOLOGIA TOOLBOX PARA INDUSTRIA 4.0. Engenharia de Produção-Pedra Branca, 2020.
TIAN, Hua; LIU, Peng; SHU, Gequn. Challenges and opportunities of Rankine cycle for waste heat recovery from internal combustion engine. Progress in Energy and Combustion Science, v. 84, p. 100906, 2021.
YU, Xinnan; FENG, Zhipeng; LIANG, Ming. Analytical vibration signal model and signature analysis in resonance region for planetary gearbox fault diagnosis. Journal of Sound and Vibration, v. 498, p. 115962, 202.
ZINGONI, Alphose. Use of symmetry groups for generation of complex space grids and group-theoretic vibration analysis of triple-layer grids. Engineering Structures, v. 223, p. 111177, 2020.
ZOU, Guang et al. Fatigue inspection and maintenance optimization: A comparison of information value, life cycle cost and reliability based approaches. Ocean Engineering, v. 220, p. 108286, 2021.
How to Cite
Copyright (c) 2021 Ítalo Rodrigo Soares Silva, Manoel Henrique Reis Nascimento, Milton Fonseca Júnior, Ricardo Silva Parente, Paulo Oliveira Siqueira Júnior, Jandecy Cabral Leite
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher. The Editors reserve the right to edit or otherwise alter all contributions, but authors will receive proofs for approval before publication.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.