Main Article Content
The design and implementation of maintenance tools is used in CAD / CAM tools, in order to make the necessary improvements in the whole process of disassembly of the equipment in question, and mainly to reduce the process time and eliminate the risk. breaking the most fragile parts of the equipment. The objective of the work is to elaborate the toolkit, to reduce the disassembly time and to eliminate damage to the equipment and its respective trajectories, with which the machine performs the machining of the designed drawing, were applied to the resources through a CNC language. (Computer Numeric Command) on a CNC lathe and a machining center. The elaboration of this project based on a CAD system, in this case Solid Works. The average time for disassembly of the equipment was around 2h, now with the proper use of tools, the same process had a time drop to 40 minutes, seen as a great time saving in the disassembly process.
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher. The Editors reserve the right to edit or otherwise alter all contributions, but authors will receive proofs for approval before publication.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.
 BIDER, I.; JALALI, A. Agile business process development: why, how and when— applying Nonaka’s theory of knowledge transformation to business process development. v. 14, p. 693-731, 2016.
 Capote, G. (2011) “Guia para Formação de Analistas de Processos – BPM”, 1ª edição, Rio de Janeiro, 2011, 328p.
 KLUSKA, R. A.; LIMA, E. P.; COSTA, S. E. G. Uma proposta de estrutura e utilização do Gerenciamento de Processos de Negócio (BPM). Revista Produção Online, v. 15, n. 3, p. 886-913, 2015. https://doi.org/10.14488/1676-1901.v15i3.1867.
 Cruz, T. (2011) “Sistemas, Métodos e Processos: Administrando Organizações por meio de Processos de Negócios”, 2°. edição. – São Paulo: Atlas, 2011.
 MARTINS, P. V.; ZACARIAS, M. An Agile Business Process Improvement Methodology. Procedia Computer Science, v. 121, p. 129–136, 2017. https://doi.org/10.1016/j.procs.2017.11.018.
 ENSSLIN, L.; et al. BPM governance: a literature analysis of performance evaluation. Business Process Management Journal, v. 23, n. 1, pp. 71-86, 2017. https://doi.org/10.1108/BPMJ-11-2015-0159.
 MIYAZAKI, T. et al. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dental materials journal. Japan, p. 1-13, 2009.
 Rinke S, Fornefett D, Gersdorff N, Lange K, Roediger M. Multifactorial analysis of the impact of different manufacturing processes on the marginal fit of zirconia copings. Dent Mater J. 2012;31 (4):601 -9.
 BISCARO, L. et al. An In Vivo Evaluation of Fit of Zirconium-Oxide Based Ceramic Single Crowns, Generated with Two CAD/CAM Systems, in Comparison to Metal Ceramic Single Crowns. Journal of Prosthodontics, v. 22 , 2013.
 VANLIOGLU, B. A. et al. Internal and marginal adaptation of pressable and computer-aided design/computer-assisted manufacture onlay restorations. International Journal of Prosthodontics, v. 25, n. 3, 2012.