Low Cost Process Modeling for a Manaus Industrial Polo factory
Keywords:Industrial Automation, Fourth Industrial Revolution, Cost Reduction, Process Management, Times and Methods
Through the centuries man has found easier and better ways to produce the goods he needs and desires. Thus through new technologies through different forms of automation, manual processes of high physical risk and high financial cost are minimized. The aim of this paper is to show that industrial automation can be applied aiming at a low cost in its implementation, presenting a fast financial return time, besides improving the product quality, reducing the production defect rates and consequently the production increase. Article was based on the automation of a modem assembly cell, where it was necessary to use four (4) operators to assemble it, the modem had a defect index of 0.12% related to annual production. The result achieved showed that after the implementation of an automatic tightening machine, only one (1) operator is required to assist in assembly and one (1) defect rate per year dropped to 0.02% per year. Industrial automation has been showing companies the power to become more competitive in the world market. Thus, it becomes essential in the process of using technologies as a tool to support business management.
COUTINHO, Luciano. A terceira revolução industrial e tecnológica. As grandes tendências das mudanças. Economia e Sociedade, [s.l.], v. 1, n. 1, p. 69-87, out. 2016. ISSN 1982-3533.
DAVILA, Tony. As regras da inovação, como gerenciar, como medir e como lucar. Porto Alegre: Bookman, 2009.
DENNIS, Pascal. Produção Lean Simplificada. 2ª ed. Porto Alegre, Bookman. 2008.
DRUCKER, P. O futuro já chegou. Revista Exame, [s.I], v. 8, n. 710, p.12-19, 22 mar. 2000.
FANTINATO, M. Métodos de pesquisa. Apresentação de aula, USP 2015.
GERHARDT, T.E.; SILVEIRA, D.T. Métodos de pesquisa. Universidade Aberta do Brasil – UAB/UFRGS e Curso de Graduação Tecnológica – Planejamento e Gestão para o Desenvolvimento Rural da SEAD/UFRGS. – Porto Alegre: Editora da UFRGS, 2009.
QIN, Jian; LIU, Ying; GROSVENOR, Roger. A Categorical Framework of Manufacturing for Industry 4.0 and Beyond. Procedia Cirp, [s.l.], v. 52, p.173-178, 2016. Elsevier BV. http://dx.doi.org/10.1016/j.procir.2016.08.005. Disponível em: <http://www.sciencedirect.com/science/article/pii/S221282711630854X?via=ihub#bibl0005>. Acesso em: 10 maio. 2019.
SILVEIRA, Paulo; SANTOS, Winderson. Automação e Controle Discreto. São Paulo: Érica, 10° edição, 2014.
SOUZA, Alceu; CLEMENTE, Ademir. Decisões financeiras e análise de investimentos: fundamentos, técnicas e aplicações. 6. ed. São Paulo: Atlas, 2012.
TAPPING, D.; SHUKER, T. Lean Office: gerenciamento do fluxo de valor para áreas adminitrativas – 8 passos para planejar, mapear e sustentar melhorias lean nas áreas administrativas. São Paulo: Editora Leopardo, 2010.
VASCONCELLOS, Marcos A. S. Garcia, M. E. Fundamentos de Economia. São Paulo: Saraiva, 5° edição, 2012.
ZHOU, Keliang; LIU, Taigang; ZHOU, Lifeng. Industry 4.0: Towards future industrial opportunities and challenges. 2015 12th International Conference on Fuzzy Systems and Knowledge Discovery (fskd), Zhangjiajie, p.2147-2152, ago. 2015. IEEE.
How to Cite
Copyright (c) 2019 Ruan Mattheus Ferreira Braga, Fabiana Rocha Pinto, David Barbosa de Alencar, Gisele de Freitas Lopes
This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Submission of an article implies that the work described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher. The Editors reserve the right to edit or otherwise alter all contributions, but authors will receive proofs for approval before publication.
Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author.